COM – Vtec Electronics GmbH

RS232 Interface - Configuration

Serial Connection

Disconnected

Baud Rate

Data Bits

Parity

Stop Bits

Manual Send

Command

Protocol

System Configuration

Communication Baud Rate (B)

Decimal Point Position (K)

LED Power (D) 0 = off, 9 = maximum

Timeout (T) xx = no timeout, yy = displays '-'

GPIO Configuration (W)

Status '>0<-' Position (Z)

Lower Weight Limit (J) Defines the minimum allowed weight (outputs turn off if below)

Upper Weight Limit (J) Defines the maximum allowed weight (outputs turn off if above)

Reset Interval (JX) Removes the allowed weight interval

Lights and status indications based on contact inputs (F) Activation Condition Lights Display (f) Status Indications (s) Customizable parameter s Minimum Display Time (x) Minimum display duration in seconds

Data sending based on contact inputs (G) Send Condition Data to transmit Data will be sent automatically based on selected condition Maximum 15 characters - Character count (YY) will be calculated automatically

Alternative Text (X) If empty, normal display. x = minimum duration in seconds

Protocol Number (P) Protocol number from 000 to 999

Serial Connection

Manual Send

System Configuration

Communication Console